Columbia Kermit/kermit.zip/newsgroups/misc.19960715-19961006/[e-mail] _Tue Sep 17 07:55:13 1996.msg

Internet Message Format | 2020-01-01 | 2KB

Return-Path: [e-mail]
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30]) by watsun.cc.columbia.edu (8.7.5/8.7.3) with ESMTP id HAA05749 for <[e-mail]>; Tue, 17 Sep 1996 07:55:13 -0400 (EDT)
Received: (from news@localhost) by newsmaster.cc.columbia.edu (8.7.5/8.7.3) id HAA24350 for kermit.misc@watsun; Tue, 17 Sep 1996 07:55:12 -0400 (EDT)
Newsgroups: comp.protocols.kermit.misc
Path: news.columbia.edu!news.new-york.net!news.iag.net!enews.sgi.com!news.sgi.com!news.msfc.nasa.gov!newsfeed.internetmci.com!in3.uu.net!EU.net!usenet2.news.uk.psi.net!uknet!usenet1.news.uk.psi.net!uknet!uknet!bcc.ac.uk!ts-b.bcc.ac.uk!uclyjjd
From: [e-mail] (Julian Daley)
Subject: 2 stop bits with msdos kermit
Message-ID: <[e-mail]>
Date: Tue, 17 Sep 1996 10:17:48 GMT
Organization: University College London
Lines: 18

I'd like to use kermit's scripting capabilities to communicate
with a piece of hardware.  The box uses 8 data bits, no parity
and 2 stopbits.  I can't seem to set ms-kermit 3.14 for more
than 1 stop bit.  I can write a c program to set the serial port
to these parameters and the interface then works ok, but with
kermit and one stop bit I get data corruption.

I also have an application where I need to use a non-standard
baud rate.  The pc serial port can be set to various baud rates
(eg 8861 baud) but I can't find a way of doing this via kermit.

Any advice welcome,
Julian.

--
_______________________________________________________________________________
          Julian Daley, Dept. Clinical Physics, Guy's Hospital, London
______________________________ [e-mail] _____________________________